Eliminator Partners

ARP Fasteners

1863 Eastman Avenue
Ventura, CA 93003
805.339.2200
www.arp-bolts.com

ARP has grown from what was literally a backyard garage workshop into a highly diversified manufacturer with five operational entities in Southern California with a combined area in excess of 200,000 square feet. These include forging, machining, finishing and packaging/warehousing facilities in Santa Paula and Ventura, California.

ARP’s product line contains thousands of part numbers, and has expanded to include virtually every fastener found in an engine and driveline. These range from quality high performance OEM replacement parts to exotic specialty hardware for Formula 1, IndyCar, NASCAR and NHRA drag racing and marine applications.

Elden Industries Corp.

9465 Inkster Road
Taylor, MI 48180
734.946.6900
www.eldenindustries.com

Elden Industries Corp. is an ISO 9001:2008 Registered full-service provider of casting repair services and non-destructive analytical testing – including thermocuring resin impregnation, welding, air under water and air decay leak testing. Elden Industries Corp services prototype & production volumes.

Hi-Tech Welding

878 York Street
Plymouth, MI 48170
734.414.1994

There is none better than Chris at Hi-Tech Welding! Whether you need a cast iron or an aluminum item welded… Hi-Tech Welding is where you should go. Extremely knowledgeable, Professional, courteous.

IA Engineering of North America, Inc.

4840 N. Adams Road, Suite 259
Rochester Hills, MI 48306
Phone: 248-941-8035
www.iae-na.com

IA Engineering offers cost-effective solutions for our customer's automation and manufacturing needs. We employ experienced professionals with expertise in automation and manufacturing systems, from product development support through integration and installation. Our team incorporates the latest technologies and software, teamed with proven design practices to exceed our customer's expectations. We maintain continuous improvement plans in project management, quality, technology, cost control and customer support.

Our expertise and execution lead to lasting, beneficial relationships with our customers and our employees. We offer engineering support through one of two methods: off-site support with single point of contact for all communication; or as on-site support teaming our experienced staff with your Project Management and support teams.

International Machine Tool & Service Co

8460 Ronda Dr. Canton, MI 48187 734.306.8201
www.imtsind.com

IMTS is your one stop shop for all Machine Tool Solutions. We are well known for over two decades, for our quality and capability in the machine tool industry, specializing in CNC's Metal Cutting and Grinding machines. Our use of modern technology we are prepared for all of your service and rebuilding needs. IMTS is located just minutes from Metro Airport and boasts a high bay facility complete with a large overhead crane and machining capability.

Mid-States Bolt and Screw Company

4126 Somers Drive
Burton, MI 48529
810.744.0123
www.midstatesbolt.com

Mid-States Bolt & Screw’s endless selection of industrial fasteners and hardware ensures that we provide the perfect solution for any construction and industrial application.

With over 75,000 standard and special quality fasteners available, we promise to precisely meet your fastener needs.

Mid-States Bolt & Screw maintains outstanding inventories at six Michigan Locations to guarantee that you not only get exactly what you need, you get it exactly when and where you need it.

Motor Castings Company

1323 South 65th Street
Milwaukee, WI  53214
Phone: 414.476.1434
Fax: 414.476.2845
www.motorcastings.com

Motor Castings began operations in 1919. Then, as now, the elements for success were clearly defined: produce quality castings, competitively priced, and deliver them on time. These elements will always remain the cornerstones of success, but things are much different today. Remarkable new techniques, equipment, alloys, analytical instrumentation, and knowledge are used to produce products of unsurpassed quality.

Motor Castings is on the leading edge of casting technologies, offering: Statistical Process Control, Ceramic Inserts, Computerized Design, Just-In-Time Delivery, Guaranteed Quality Program, Special Metals Research, Elevated Temperature Program and more...

We have recorded broad but detailed metallurgical experiences with gray and ductile irons, compacted graphite iron, ductile niresist and steels. Each job suggests different options. In every assignment, having the flexibility to alter sand or alloy composition -- and the experience to predict the outcome of these alterations -- gives Motor Castings' customers a decided edge in product design and cost containment.

MRT Machining, LLC

8460 Ronda Dr., Suite 2
Canton, MI 48187
Phone: 734.306.8201
www.mrtmachiningllc.com

MRT Machining is a awesome machining center for low-medium volume machining. The dedication to getting it right the first time and everytime is second to none. This is truly a machinist that owns a machining center.

National Pattern

5900 Sherman Road
Saginaw, MI 48604
Phone: 989.755.6274
Fax: 989.755.0946
www.nationalpattern.com

National Pattern, Inc. has a qualified engineering staff that is always ready to collaborate with you on tool, fixture, casting, and machine design. The diversified skills of our people allow us to assist customers in the development of new casting processes and techniques. We regularly train key employees on the advances of technology such as new computer modeling techniques, new part programming, and advances in CNC machining. We also have a well-established apprenticeship program that insures that we add the best qualified new employees to out staff.

The innovative computer system at National Pattern, Inc. insures that we are flexible and powerful enough to initiate any pattern design. Computer services include Unigraphics, Work NC, Computer Vision, Ideas 6.0, Catia, and AutoCAD. National Pattern, Inc. also has a variety of data storage formats that allows our customers and us, uncomplicated data transfer between each other.

Computer modeling, design, and programming are fully integrated into the manufacturing and validation process. DNC, CNC, Digitized and Reverse Engineering are some of the capabilities that places National Pattern, Inc. in an excellent position to insure that we obtain the highest possible quality. Future investments will insure that National Pattern, Inc. will remain on the leading edge of tooling technology.

PATTERN ENGINEERING, INC.

48501 Structural Drive
Chesterfield, MI 48051
586.598.1407
www.patterneng.com

Pattern Engineering, Inc., services a wide range of needs, from the simplest tool to the most complex configuration. We utilize state-of-the-art technology, as well as rely on the forgotten art of fine hand built construction.

Since 1986 our work has encompassed everything from the very basic to the most complex castings. From concept to the final product, you can rely on Pattern Engineering’s experience and high tech approach to ensure a quality product.

Rock Transfer & Storage Co.

6130 S. 13th St.
Milwaukee, Wisconsin 53221
414.570.2180
www.rocktransfer.com

For nearly four decades, manufacturers have relied on Rock Transfer & Storage to meet their critical transportation and warehousing needs. We’ve earned our reputation and we’re proud of what we deliver.

We make transportation easy. Every day, we’re out there moving businesses forward on time, error-free and with a remarkable claims ratio. Learn more about how we can become your partner in transportation.

Roma Tool

2709 Bond St
Rochester Hills, MI 48309
248.218.1889
www.romatool.com

Roma Tool is "AUTOMATION SOLUTIONS". Our innovative design staff has helped Tier 1, 2 & 3 automotive suppliers achieve their objectives of performance and reliability. Serving the automotive and transportation industries among others, Roma Tool prides itself in its ability to assess the application needs of its customers and provide innovative and cost effective solutions.

Roma Tool is a full service design, machine and build firm providing a host of mechanical design services like Functional Design, Creative Solutions, Engineering and Prototype Designs. We are your one-stop-shop from concept to production.

Ross Aluminum Castings

815 Oak Ave.
Sidney, OH 45365
937.492.4134
www.rossal.com

Ross Aluminum Castings is an Ohio based, US owned, state-of-the-art aluminum foundry which has been producing aerospace castings, performance racing castings, diesel engine castings and power generation castings for almost eighty years.

Ross Aluminum Castings is one of the few aluminum casting suppliers that brings years of practical know-how and problem-solving to the challenges of today's transportation, trucking, power generation, aerospace, manufacturing and specialty automotive industries.

Ross is a full service aluminum casting foundry. Our reputation is built on producing precision aluminum castings with reliability, high quality and superior mechanical properties. You can count on our highly-trained engineering staff to help determine the most effective combination of alloys, aluminum casting methods, melting practices, gating design and heat treatments to meet your product performance criteria.

US Pattern 

69150 Skinner Drive
Richmond, MI 48062
586.727.2896
www.uspattern.com

U. S. Pattern Co., Inc. began producing its first foundry tooling in 1941.Located in Detroit, the Company quickly established itself among the area foundries as an innovative and quality driven company that produced top quality tooling for the foundry industry. Today, U. S. Pattern is one of the oldest and most respected pattern shops in the state of Michigan offering continuous services for the past 75 years. U. S. Pattern remains committed to providing its customers with world-class quality pattern equipment that meets or exceeds the customer’s expectations.

CSI Compressco LP

24955 Interstate 45 North
The Woodlands, TX  77380
Phone:  281.364.2244
Toll Free: 800.259.2714
www.csicompressco.com

Compressco, a TETRA Technologies Company headquartered in The Woodlands, Texas is a leading manufacturer of Production Enhancement Solutions for Marginal and Low Pressure Oil and Gas Wells. Utilizing the GasJack™ technology, the company’s Production Enhancement Solutions can dramatically increase the daily production and total recoverable reserves allowing the customer to substantially increase both cash flows and the net present value of their producing reserves of natural oil and gas.

Marginal wells currently represent more than 64% of all domestic natural gas wells, but account for less than 10% of total domestic production. With demand for natural gas outstripping domestic supply, technologies to enhance production and profitability of marginal wells have become increasingly necessary. The GasJack™ fills this niche allowing the producer to extend the life and viability of this valuable resource.

Sales and Service Operations are located throughout the producing regions of the U.S., Canada and Mexico. A full-service Petroleum Engineering office is located in Houston, Texas to provide customers with well-evaluation candidate selection for best results. This information provides optimal application success and the two-week trial service can confirm the viability of the Production Enhancement Solution prior to agreeing to a monthly service term. Compressco is “your Production and Profit Enhancement Partner!”

HEC-TINA

1621 Industrial Rd., Unit B
Greenville, TN 37745
423.278.2952
www.cleangreenengines.com/

HEC is an alternative energy company that works with primarily industrial customers to produce electrical power. We work with landfill companies that have methane to burn, industrial clients that have hydrogen as a by-product from their main business, bus and airport service companies that want to power their vehicles with hydrogen, propane, or compressed natural gas, and other companies that want to use alternative energy for power. We work with all sorts of companies that want to go “green”.

As a general rule we do not work with individuals that are trying to convert their automobile or homes to alternative fuels. We also do not work with diesel or any fuels that must be ignited by compression. The minimum power level we work with is around 20 kW. We are able to provide power levels up to several megawatts.

© Eliminator Performance Products 2016